Holden Engineers Fine-Tuning 2013 Chevy Malibu for Global Markets

The all-new 2013 Chevrolet Malibu has made its way to Australia landing in the hands of Holden’s engineering team, which was recruited by General Motors to assist in the calibration of the mid-size sedan for both the local and global markets outside of North America.

The Australian team is working on the Malibu at Holden’s Lang Lang Proving Ground in the State of Victoria while also evaluating the car on public roads. GM said Holden will continue development of Malibu until the end of 2012.

Read more »

Hoon Crackdown: Two Anti-Hooning Ads from Different Ends of the Spectrum

In Australia and New Zealand, “hooning” is a term applied to any anti-social and often dangerous behavior behind the wheel of a car. Burnouts, car surfing and illegal street racing all fall under this rather broad definition. And it’s an ever-growing problem. Each year there are more reports like, “Hoons kill innocent driver in Dandenong, say police” and, “Man killed in Burwood Highway 'hoon' crash.”

So it’s obvious that cracking down on hooning is very important to the governments of both nations. Here we have two adverts, one from Oz and one from Kiwiland, that use tactics both old and new to get their message across. The Aussie one plays on that, “If you hoon, you’ll lose your car” message while the NZ one plays on the, “If you hoon, you’ll lose your life” vibe. Who knew that New Zealand’s roads were covered with hidden landmines?

Read more »

Report: Next Holden Commodore VF to get Aluminium Panels, Electric Power Steering

*Current Holden WM Caprice pictured in the above development sketch

When Holden’s next-generation VF Commodore series launches in Australian in 2014, it will be the first locally-produced automobile to incorporate mass produced aluminium panels in its construction. In addition, the new large car, which will also spawn a long-wheelbase Caprice model, will get improved aerodynamics and electric power steering in place of the current-gen’s hydraulic unit. It’s all part of an effort by Holden to lighten up its flagship model and thereby make it more fuel efficient in an effort to remain competitive with the likes of the locally-produced Toyota Camry Hybrid.

Fuel savings are expected to be around the 7% mark, bringing the 9.1lt /100 km (26 mpg) combined rating of the 3.0 L V6 SIDI down to a more politically-correct 8.4 lt/ 100 km (28 mpg). Similar savings will be experienced with the older 3.6 L Alloytec V6: 9.1 lt / 100 km (26 mpg) down from 9.8 lt / 100 km (24 mpg). The program is part-funded by the Australian federal government, which poured AU$39.8 million in from the now defunct Green Car Innovation Fund.

Read more »

Holden Begins Local Testing of New Cruze Hatchback

Following the Australian market launch of the locally made and subtly refreshed Cruze Series II Sedan in March, GM’s Holden division announced today that it has began testing the five-door hatchback version of the subcompact model to fine tune the car before its introduction later this year. Holden also released two new photos of the Cruze hatch, which was designed by the firm’s Port Melbourne design studio. Read more »

Sport Truck Redux: New Rumors About the Holden Ute Heading to the U.S.A.

It’s a poorly kept secret that many Americans are quite fond of the Australian-made and Commodore-derived, Holden Ute, which we recently drove in Queensland. It’s big, brutish and comfortable with a bevy of engine and equipment options to suit virtually any budget or taste - so long as those tastes only extend to, “Big, brutish V6 or V8 engined utes”.

Before the Global Financial Crisis of 2009, the subsequent bankruptcy GM and the disillusion of the Pontiac brand, as many as half of the Holden Commodores built in Australia were destined for the U.S. and the world in the form of the Pontiac G8. A thinly disguised Holden Ute even made a showing at the 2008 New York Auto Show as the Pontiac G8 Sport Truck.

Read more »

Celebrating 50 Years of Queensland’s Lakeside Park [with Gallery]

Nestled somewhat innocuously behind a golf course in Pine Rivers Shire, South East Queensland, Australia, is historic Lakeside Park Raceway. It holds the distinction as the Queensland’s first permanent, purpose-built racetrack and has sat - for fifty years - on the banks of Lake Kurwongbah. It is a monument to both motorsport and Australia’s can-do attitude, having been built on a foundation of favors, borrowed equipment and volunteer labor - not to mention a former dairy farm.

It is 2.4 km (1.5 miles) of bitumen and yet, it is so much more. Several Aussie motorsport legends – including Dick Johnson, Tony Longhurst and Mick Doohan – cut their teeth at Lakeside. It may not share the prestige or recognition afforded to other tracks like Mount Panorama or Philip Island, but to those who know it Lakeside is just as beloved.

Read more »

First Drive: 2011 Holden VE Series II SS V8 Ute

2011 is a very special year for two Australian motoring icons. For one, it’s the 50th anniversary of Queensland’s first permanent, purpose-built raceway: Lakeside Park. It’s also marks the 60th anniversary of Holden’s FX Utility, a vehicle widely considered by enthusiasts to be the forefather of the home grown Aussie “ute”. In recognition of these historic occasions, we took a Holden VE Series II SS Ute for a test drive and headed north to attend the first of Lakeside’s three 50th anniversary events. Part one of this feature will cover my impressions of the Ute, whilst part two will take in the event itself. So let’s get cracking.

Overview

The VE Ute is already an attractive vehicle and in SS guise this is complemented with 18-inch alloys, front fog lights and a lowered sports suspension. With its 6.0 L V8 the SS is certainly powerful, but it’s also safe with a maximum 5-star ANCAP rating thanks to its six airbags and electronic stability control.

Read more »